BMP085 baro sensor kits

Ask availability strpcb@gmail.com

SoarTronic OTX1

OTX1 is available with one of different usb cables:
-USB otg cable
-USB A-A adapter
or
-USB A - A panel mount cable   Panelmount cables available again!  please email or add note on paypal, if you need panelmount cable instead of OTG cable or A-A adapter

Select a suitable USB cable and place your order:

SoarTronic OTX1

OTX1 + USB A - micro otg cable €60.00 EUR OTX1 + USB A-A adapter €60.00 EUR

OTX1 is designed to work with KOBO ebook reader with xcsoar installed, it may NOT work with android devices

SOARTRONIC OTG1 how to.

Connect 12v power line to the 12v and GND solder pads or use RJ45 cable with 12v.

Use the normal IGC 1:1 RJ cable for FLARM. 

Install XCSOAR and go system on start screen, select enable usb-otg.

Set up xcsoar as usual, ie. For example Flarm: go devices, select port ttyUSB0 , Driver Flarm. Baudrate 19200. 

When everything is working the way you want, use shrink tube to protect otg1 against short circuit .

SOARTRONIC OTG1 /OTX1

Available january-february 2016...

Soartronic OTX1 is a Plug&Play solution to connect your KOBO/XCSoar 

with FLARM, and maybe other devices.

Soartronic OTX1 is developed for charging KOBO devices running XCSoar 

and connecting with one device (usually FLARM) over RS232 and IGC 

standard RJ cable. This means that you can connect this directly with 

your FLARM using standard cable. It will also have RJ45 splitter, so 

that you can easily add it in your existing FLARM installation.

This one has it's own 12V / 5V conversion, and it can connect 12V to 

your FLARM, if you like it that way. It will have place for 12V and GND wires 

ready.